ATTACHMENTS – BALL-JOINT DIN 24338 / ISO 6982

Tolerance Limit Load Rate Radial Oscillation Pressure Screw Screw Weight
CODE(*) d d s S D4 I D1 D2 S1 S2 L L1 D3 LF F Dynamic Static Movement Angle Thread Tightening (kg)
mm KN mm
TAPR 612 CE(1) 12 0÷ +0.018 0÷ -0.18 12 15.5 38 32 32 11 15 54 14 16 17 M12x1.25 10.8 24.5 0.023-0.068 4 M5x16 6 0.11
TAPR 616 CE 16 0÷ +0.018 0÷ -0.18 16 20 44 40 40 13 15 64 20 21 19 M14x1.5 17.6 36.5 0.030-0.082 4 M6x14 10 0.20
TAPR 620 CE 20 0÷ +0.021 0÷ -0.21 20 25 52 47 47 17 19 75 22 25 23 M16x1.5 30 48 0.030-0.082 4 M8x20 25 0.35
TAPR 625 CE 25 0÷ +0.021 0÷ -0.21 25 30.5 65 58 54 22 19 96 27 30 29 M20x1.5 48 78 0.037-0.100 4 M8x20 25 0.62
TAPR 632 CE 32 0÷ +0.025 0÷ -0.25 32 38 80 71 66 28 22 118 32 38 37 M27x2 67 114 0.037-0.100 4 M10x25 49 1.15
TAPR 640 CE 40 0÷ +0.025 0÷ -0.25 40 46 97 90 80 33 26 146 41 47 46 M33x2 100 204 0.043-0.120 4 M10x30 49 2.18
TAPR 650 CE 50 0÷ +0.025 0÷ -0.25 50 57 120 109 96 41 32 179 50 58 57 M42x2 156 310 0.043-0.120 4 M12x35 86 3.96
TAPR 663 CE 63 0÷ +0.030 0÷ -0.30 63 71.5 140 136 114 53 38 211 62 70 64 M48x2 255 430 0.055-0.142 4 M16x40 210 6.80
TAPR 670 CE(2) 70 0÷ +0.030 0÷ -0.30 70 79 160 155 135 57 42 245 70 80 76 M56x2 315 540 0.055-0.142 4 M16x40 210 9.60
TAPR 680 CE(2) 80 0÷ +0.030 0÷ -0.30 80 91 180 170 148 67 48 270 78 90 86 M64x3 400 695 0.055-0.142 4 M20x50 410 13.00
TAPR 690 CE(2) 90 0÷ +0.035 0÷ -0.35 90 99 195 185 160 72 52 296 85 100 91 M72x3 490 750 0.055-0.142 4 M20x60 410 19.10
TAPR 6100 CE(2) 100 0÷ +0.035 0÷ -0.35 100 113 210 211 178 85 62 322 98 110 96 M80x3 610 1060 0.065-0.165 4 M24x60 710 25.00
TAPR 6110 CE(2) 110 0÷ +0.035 0÷ -0.35 110 124 235 235 190 88 62 364 105 125 106 M90x3 655 1200 0.065-0.165 4 M24x60 710 32.00
TAPR 6125 CE(2) 125 0÷ +0.040 0÷ -0.40 125 138 260 265 200 103 72 405 120 135 113 M100x3 950 1430 0.065-0.165 4 M24x70 710 46.00
TAPR 6160 CE(2) 160 0÷ +0.040 0÷ -0.40 160 177 310 326 250 130 82 488 150 165 126 M125x4 1370 2200 0.065-0.192 4 M24x80 710 82.50
TAPR 6200 CE(2) 200 0÷ +0.046 0÷ -0.46 200 221 390 418 320 162 102 620 195 215 161 M160x4 2120 3650 0.065-0.192 4 M30x100 1500 168.00

(1) No grease nipple
(2) Material: nodular cast iron (*) When requiring a left-hand theading, replace on the article code the letter “R” by “L”. E.G. TAPL…CE. Availability and price upon request. It is possible to supply ball-joint ends with “free maintenance” ball joints. Consequently the pieces would not have grease nipples.


ATTACHMENTS – FORK JOINT HINGE ISO 8133 / FIXATIONS

CODE CM CK(H9) CE CL ChF KK LE ER B IR S          Dowel
CF 1310 12 10 32 24 19 M10x1.25 13 12 6 10 5 M 5×5
CF 1310 12 10 32 24 19 M10x1.25 13 12 6 10 5 M 5×5
CF 1312 16 12 36 32 21 M12x1.25 19 17 8 15 7 M 5×5
CF 1314 20 14 38 40 21 M14x1.5 19 17 10 15 8 M 5×5
CF 1316 30 20 54 60 32 M16x1.5 32 29 15 26 13 M 6×6
CF 1316 30 20 54 60 32 M16x1.5 32 29 15 26 13 M 6×6
CF 1320 30 20 60 60 32 M20x1.5 32 29 15 26 13 M 6×6
CF 1327 40 28 75 80 40 M27x2 39 34 20 30 17 M 6×6
CF 1333 50 36 99 100 56 M33x2 54 50 25 46 22 M 8×8
CF 1342 60 45 113 120 56 M42x2 57 53 30 49 27 M 8×8
CF 1348 70 56 126 140 75 M48x2 63 59 35 38 31 M 8×8
CF 1364 80 70 168 160 95 M64x3 83 78 40 45 37 M 12×12
CF 1380 80 70 168 160 95 M80x3 83 78 40 74 37 M 12×12

Pin for fork joint hinge ISO 8133

CODE D L D1 L1 A B Used for joint hint
PCF 1910 10 34 9.6 29 1.40 1.10 CF 1310
PCF 1911 12 43 11.5 37 1.90 1.10 CF 1312
PCF 1912 14 51 13.4 45 1.90 1.10 CF 1314
PCF 1913 20 73 19.0 66 2.20 1.30 CF 1316
PCF 1914 20 73 19.0 66 2.20 1.30 CF 1320
PCF 1915 28 95 26.6 87 2.40 1.60 CF 1327
PCF 1916 36 117 34.0 107 3.15 1.85 CF 1333
PCF 1917 45 139 42.5 129 3.15 1.88 CF 1342
PCF 1918 56 161 53.0 149 3.80 2.17 CF 1348
PCF 1919 70 181 67.0 169 3.35 2.65 CF 1364
PCF 1920 70 181 67.0 169 3.35 2.65 CF 1380

DOWNLOAD FILE – Attachments [Series 8000]

PDF-icon